| |
Engineering |
| |
-
ENGR 313 - Engineering Internship
Credit(s): 1
Lecture Hours: 1
Lab Hours: 0
When Offered: Fall, Spring, Summer
Work experience during one summer or semester for a business, industry or government agency, on-site, in an engineering intern (apprenticeship) position which is approved by the department chair. A final report is required. Students who complete the co-op program will be allowed to substitute their last co-op semester for this course. Students enrolled in this course will be considered full-time by the College of Engineering and Natural Sciences.
Prerequisite(s): At least Junior standing and approval of the Department Chair.
|
| |
-
ENGR 315 - Engineering Analysis
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall, Spring
Formulation and solution of differential equations typical to engineering. Emphasis will be placed on classical solution techniques of ordinary differential equations and Laplace transforms
Prerequisite(s): MATH 252 .
|
| |
-
ENGR 315H - Honors Engineering Analysis
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall, Spring
Formulation and solution of differential equations typical to engineering. Emphasis will be placed on classical solution techniques of ordinary differential equations and Laplace transforms.
Prerequisite(s): MATH 252 and instructor’s approval.
|
| |
-
ENGR 316 - Signals and Systems
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall
Classification of signals and systems, convolution representation of systems, response of linear systems to periodic and finite-energy signals, system modeling by differential equations, Fourier series and transforms, frequency domain analysis of systems.
Prerequisite(s): ENGR 232 , ENGR 241 and either ENGR 315 or MATH 330 .
|
| |
-
ENGR 317 - Computational Methods and Numerical Analysis
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring
An introduction to numerical solutions of real-world engineering problems using Excel and structured programming in MATLAB. Solution techniques for nonlinear equations, systems of linear equations, numerical differentiation, numerical integration, and nonlinear ordinary differential equations will be used to solve engineering analysis problems.
Prerequisite(s): ENGR 241 and 315.
|
| |
-
ENGR 331 - Semiconductor Electronics
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall
Basic electronic devices including diodes, bipolar junction transistors, and field-effect transistors; elementary power supplies and voltage regulation, transistor applications, amplifier fundamentals, operational amplifier applications, and small-signal transistor amplifiers.
Prerequisite(s): ENGR 231 and ENGR 232 .
|
| |
-
ENGR 331L - Engineering Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 3
|
| |
-
ENGR 332 - Linear Circuits II
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring
A second course in linear circuits (following ENGR 232 ). RLC Circuits, three-phase circuits, magnetically coupled circuits, frequency response, and two-port networks.
Prerequisite(s): ENGR 232 .
|
| |
-
ENGR 332L - Engineering Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 3
|
| |
-
ENGR 333 - Electrical Laboratory II
Credit(s): 1
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring
Lab methods, experiments and design approaches that illustrate and apply semiconductor electronics and linear circuit topics covered in ENGR 331 and ENGR 332 .
Prerequisite(s): ENGR 233 and ENGR 331 .
Corequisite(s): ENGR 332 .
|
| |
-
ENGR 340 - Thermodynamics
Credit(s): 3
Lecture Hours: 0
Lab Hours: 3
When Offered: Fall
Fundamentals of engineering thermodynamics. The phases of a pure substance and their thermodynamic properties. The concept of work and heat, conservation of mass, conservation of energy, entropy and the second law of thermodynamics using closed system and control volume analyses.
Prerequisite(s): PHYS 220 .
Corequisite(s): MATH 320 .
|
| |
-
ENGR 341 - Fluid Mechanics
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring
Fluid properties and behavior, fluid statics and dynamics of ideal and real fluids. Continuity, momentum, energy equations for control volume analyses. Laminar and turbulent incompressible flows. Pipe flows, open channel flow, lift and drag calculations.
Prerequisite(s): ENGR 241 .
|
| |
-
ENGR 350 - Principles of Land Surveying and Geomatics
Credit(s): 3
Lecture Hours: 2
Lab Hours: 0
When Offered: Fall
Engineering surveying measurements, methods and computations. Mensuration, leveling, traversing, topographic mapping. Earthwork computations, horizontal and vertical curves.
Corequisite(s): MATH 160 or MATH 251 .
|
| |
-
ENGR 350L - Engineering Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 3
|
| |
-
ENGR 351 - Basic Structural Analysis
Credit(s): 4
Lecture Hours: 4
Lab Hours: 0
When Offered: Spring
Analysis of statically determinate and indeterminate structural elements and systems for loads and deformations. Analysis of beams, trusses, floor systems and frames. Determination of gravity and liveloads. Determination of deformations by the elastic curve and by energy methods. Indeterminate analysis using force, displacement and approximate methods. Use of computer spreadsheets.
Prerequisite(s): ENGR 220 .
|
| |
-
ENGR 352 - Transportation Engineering
Credit(s): 3
Lecture Hours: 2
Lab Hours: 0
When Offered: Fall
Analysis of the characteristics of transportation systems, including vehicle dynamics, volumes, speeds, capacities, roadway conditions and accidents. Traffic studies. Highway design including intersections, horizontal and vertical alignment, and pavement design.
Prerequisite(s): MATH 252 .
Corequisite(s): ENGR 311 .
|
| |
-
ENGR 352L - Transportation Engineering Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 2
|
| |
-
ENGR 353 - Hydraulics and Hydrology
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring
Fundamentals of open channel hydraulics and engineering hydrology. Hydrologic cycle, qualitative and quantitative hydrology and related practical engineering computations involving precipitation, runoff and discharge. Engineering analysis of practical open channel flows; energy, depth, slope and transient considerations.
Prerequisite(s): ENGR 311 .
Corequisite(s): ENGR 341 .
|
| |
-
ENGR 356 - Construction Materials
Credit(s): 2
Lecture Hours: 1
Lab Hours: 0
Understanding the engineering properties of various construction materials such as: aggregates, masonry products, timber products, bituminous material, steel, and structural connections.
Prerequisite(s): ENGR 220
|
| |
-
ENGR 356L - Construction Materials Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 3
|
| |
-
ENGR 361 - Digital Signal Processing
Credit(s): 4
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring
Properties of continuous and discrete signals. Z-transform and Fast-Fourier Transform. Sampling theorem and IIR and FIR Digital filtering techniques
Prerequisite(s): ENGR 316 .
|
| |
-
ENGR 361L - Engineering Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 3
|
| |
-
ENGR 370 - Vibrations
Credit(s): 4
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall
Free and forced vibration of translational and rotational single- and multi-degree-of-freedom mechanical and structural systems. System modeling and analytical and computer simulated response to periodic and general input excitations. Selection of system parameters to achieve desired response. Resonance and rotating unbalance. Modal analysis of multi-degree-of freedom systems. Experimental verification of analytical results, with report writing.
Prerequisite(s): ENGR 220 , ENGR 241 and ENGR 315 .
|
| |
-
ENGR 370L - Engineering Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 3
|
| |
-
ENGR 371 - Advanced Strength of Materials
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring
Development and application of the equations of equilibrium, strain-displacement equations, and stress-strain relationships to plane stress, plane strain and axisymmetric problems. Solution of problems involving thick walled cylinders, interference fits, rotating disks, torsion of non-circular cross sections, and non-symmetric bending.
Prerequisite(s): ENGR 220 .
|
| |
-
ENGR 380 - Engineering Economy
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall, Spring
Economic decision making for engineering projects and capital expenditures proposals. Concepts of time value of money, cash flow and capital rationing. Basic comparative models for evaluating alternatives. Depreciation and tax consequences. Students cannot receive credit for both INEG 380 and ENGR 380.
Prerequisite(s): MATH 251 and Sophomore standing.
|
| |
-
ENGR 381 - Human Factors in Engineering
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall - Even
A study of the limitations of humans in production and other man-made systems. Analysis of stress and environmental factors such as noise, lighting and atmospheric conditions on performance of tasks.
Prerequisite(s): Instructor’s approval.
|
| |
-
ENGR 382 - Metals Casting and Joining Processes
Credit(s): 3
Lecture Hours: 2
Lab Hours: 0
When Offered: Fall
Process concepts providing an operational knowledge of the practice and theory of metals casting, welding and thermal cutting. Application of metallurgical principles to the casting of metals. Study of mold materials, metal flow, and cast metals. Analysis and application of primary and secondary processing methods for the manufacture of products. Development of process designs and practices appropriate for product specifications, inspection and process control.
Prerequisite(s): ENGR 220 and ENGR 310 .
|
| |
-
ENGR 382L - Joining&Casting Processes Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 3
|
| |
-
ENGR 383 - Material Forming Processes
Credit(s): 2
Lecture Hours: 2
Lab Hours: 0
When Offered: Spring
Concept design steps for metal forming and stamping dies. Analysis and control of metal forming processes. Analysis and application of secondary processing methods for the manufacture of products. Two lecture hours.
Prerequisite(s): ENGR 220 .
Corequisite(s): ENGR 302 .
|
| |
-
ENGR 409 - Engineering Design and Project Management
Credit(s): 2
Lecture Hours: 2
Lab Hours: 0
When Offered: Fall
An introduction to engineering design and project management. Topics include the design process, establishing goals, objectives, and requirements, project planning, estimating, scheduling, tracking and monitoring, team work, resolving conflicts, and engineering ethics in the context of design and project management.
Corequisite(s): ENGR 410 .
|
| |
-
ENGR 410 - Senior Design I
Credit(s): 1
Lecture Hours: 1
Lab Hours: 0
When Offered: Fall
Working as individuals or in teams, students conduct an engineering design project while working under the direction of a faculty adviser. Students are required to organize and develop a plan for accomplishing project activities; establish goals, objectives and design requirements; gather information; develop concepts; perform trade studies, analyses and engineering assessments; and develop engineering design packages that may include system diagrams, schematics, CAD models and assembly and part drawings. A summary poster presentation required.
Prerequisite(s): Senior standing and approval of the student’s adviser.
|
| |
-
ENGR 411 - Senior Design II
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring
A continuation of ENGR 410 . Working as individuals or in teams, students complete the design project defined in ENGR 410 . This capstone design project requires that students apply knowledge gained in previous coursework to solve practical, open-ended engineering problems encountered on a realistic project having deadlines and performance requirements. Some projects may require hardware fabrication and product realization. A final report, poster and presentation are required.
Prerequisite(s): ENGR 301 and ENGR 410 .
|
| |
-
ENGR 413 - Engineering Management
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall - Odd
Human, quality, organizational, legal and ethical aspects of the engineering profession.
Prerequisite(s): instructor’s approval.
|
| |
-
ENGR 440 - Energy Systems
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall
A continuation of ENGR 340 . Applications involving entropy as a property and The Second Law of Thermodynamics. Thermodynamic analyses of vapor power cycles, gas power cycles, refrigeration cycles, nozzles and psychrometric applications. Analyses of reactive gas mixtures, hydrocarbon fuels and combustion.
Prerequisite(s): CHEM 121 and ENGR 340 .
|
| |
-
ENGR 450 - Reinforced Concrete Design
Credit(s): 4
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall
Reinforced concrete as a modern construction material. Aggregate and Portland cement properties and mix design. Structural analysis and design of rectangular beams, T-beams, beam-columns and one-way floor slabs using the American Concrete Institute (ACI) 318 code. Standard lab tests and design project with test verification. Determination of wind and earthquake loads. Use of computer spreadsheets.
Prerequisite(s): ENGR 351 .
|
| |
-
ENGR 450L - Engineering Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 3
|
| |
-
ENGR 451 - Geotechnical Engineering
Credit(s): 4
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring
Introduction to soil mechanics, shallow foundations and retaining structures. Soil identification and classification, compaction, effective stress, consolidation, shear strength, vertical and lateral stress and slope stability. Standard lab tests. Response of soil to foundation and retaining structure loads, including settlements and stability. Design of shallow foundations and retaining structures.
Prerequisite(s): ENGR 220 .
Corequisite(s): ENGR 351 .
|
| |
-
ENGR 451L - Engineering Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 3
|
| |
-
ENGR 452 - Steel Design
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall
Structural analysis and design of beams, columns, axial members, frames and connections using the American Institute of Steel Construction (AISC) Manual. Use of computer spreadsheets.
Prerequisite(s): ENGR 351 .
|
| |
-
ENGR 453 - Pavement Design and Analysis
Credit(s): 3
Lecture Hours: 2
Lab Hours: 0
When Offered: Spring
Design principles of highway pavements. Pavement stresses and strains. Flexible and rigid pavement materials testing and mix design. Thickness design of asphalt and concrete pavements. Pavement distresses and evaluation.
Prerequisite(s): ENGR 220 .
|
| |
-
ENGR 453L - Engineering Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 3
|
| |
-
ENGR 454 - Computational Hydraulics and Computational Hydrology Modeling
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall
Basic functional Geographic Information Systems skills necessary to support hydraulic and hydrologic modeling are covered. The underlying equations supporting the computational modeling of open channel hydraulics and practical, engineering hydrology, are reviewed. A series of exercises composed of practical applications utilizing widely used and accepted computational hydraulic and computational hydrologic software.
Prerequisite(s): instructor’s approval.
|
| |
-
ENGR 455 - Timber Design
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring
Identify the structural properties of wood and the effects of various physical, environmental, and manufacturing factors upon wood strength and stiffness. Design solid-sawn and engineered wood structural members such as beams, columns, and beam columns. Design plywood structures. Analyze and design structural connections for wood and engineered wood structures. Design wood diaphragms and shear walls.
Prerequisite(s): ENGR 351 .
|
| |
-
ENGR 456 - Environmental Engineering
Credit(s): 3
Lecture Hours: 2
Lab Hours: 0
When Offered: Spring
Fundamental concepts in environmental engineering dealing with water, air, and land pollution and other areas such as environmental laws and regulations, mass balance approach, and pollution control technologies. Basic principles of water and wastewater characteristics and treatments. The course will include design components related to drinking water treatment plants, waste water treatment plants, and distribution systems.
Prerequisite(s): CHEM 121 .
Corequisite(s): ENGR 341
|
| |
-
ENGR 456L - Environmental Engineer I Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 3
|
| |
-
ENGR 457 - Environmental Engineering II
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
Advanced topics in environmental engineering with an emphasis on system analysis and design. Laws and regulations and design component governing the storage, transportation, treatments and disposal of municipal waste. Other topics include sustainability, energy resources, green engineering, risk assessment. The course will include design components of sewer systems, advanced wastewater treatment plants and landfills.
Prerequisite(s): ENGR 456 .
|
| |
-
ENGR 459 - Engineering Design and Construction Management
Credit(s): 2
Lecture Hours: 2
Lab Hours: 0
When Offered: Fall
An introduction to construction engineering and management concepts. Topics include understanding the design process. Introduction to engineering design as it relates to the preparation of contract drawings and the ability to read and properly interpret drawings. Understanding construction delivery and procurement methods, types of construction contracts, project planning, estimating and scheduling, quality assurance and control in the design and construction process, health and safety, and engineering ethics in the context of design and project management.
Corequisite(s): ENGR 410 .
|
| |
-
ENGR 460 - Microprocessors and Computer Organization
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring
Computer organization, memory hierarchy, digital interfacing, use of microprocessors in common consumer applications, study of contemporary general and special purpose architectures. Three lecture hours.
Prerequisite(s): ENGR 231 , ENGR 232 , ENGR 233 and CSCI 221 .
|
| |
-
ENGR 461 - Communication Systems
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring
Analog and digital communication systems, information coding, modulation, signal processing techniques, software and hardware implementations, contemporary wireless, audio and video applications.
Prerequisite(s): ENGR 231 , ENGR 311 , and ENGR 316 .
|
| |
-
ENGR 461L - Engineering Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 3
|
| |
-
ENGR 462 - Linear Control Systems Design
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall
An interdisciplinary approach to feedback control system analysis and design. Block diagrams, transfer functions, stability, steady state error, time response, root locus and Bode techniques, lead/lag compensators and design of PID controllers.
Prerequisite(s): ENGR 232 , ENGR 241 , and ENGR 315 .
|
| |
-
ENGR 462L - Engineering Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 3
|
| |
-
ENGR 463 - Electrical Power Systems
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: As Needed
Fundamentals of power systems analysis, transformers, per-unit analysis, transmission line parameters, transmission lines, and power flow.
Prerequisite(s): ENGR 201 , ENGR 315 and ENGR 332 .
|
| |
-
ENGR 463L - Engineering Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 3
|
| |
-
ENGR 464 - Engineering Electromagnetics
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring
Application of physical laws of electricity and magnetism to the design of electrical components, including resistors, capacitors, inductors, and transmission lines. Transient and steady-state behavior of electromagnetic waves.
Prerequisite(s): PHYS 221 , ENGR 232 and MATH 320 .
|
| |
-
ENGR 465 - Electric Machines
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring
Introduction to magnetic circuits and transformers, electromechanical energy conversion principles, three-phase Circuits and power, phasors, DC motors and generators, induction machines, synchronous machines and drives, inverters, DC-DC conversion, and motor control.
Prerequisite(s): ENGR 332 and PHYS 221 .
|
| |
-
ENGR 466 - Digital Systems Design
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring
Techniques and strategies for designing digital systems.
Prerequisite(s): ENGR 231 .
|
| |
-
ENGR 467 - Embedded Systems Laboratory
Credit(s): 1
When Offered: As needed
The fundamentals of integrating micro-controllers, sensors, and actuators to create embedded systems. One three-hour lab.
Prerequisite(s): ENGR 231 , ENGR 232 , ENGR 233 , and CSCI 221
|
| |
-
ENGR 471 - Heat Transfer
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring
An introduction to the theory of conduction, convection and radiation and their use in engineering applications. Steady and transient heat transfer solutions with analytical and numerical solutions. An introduction to heat exchanger analysis and multi-phase heat transfer.
Prerequisite(s): ENGR 317 and ENGR 341 .
|
| |
-
ENGR 472 - Kinematics/Dynamics of Machines
Credit(s): 4
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall
Analysis and synthesis of mechanisms and machine systems subjected to dynamic forces and motion constraints. Topics covered include classical analysis and synthesis of mechanisms, computer modeling and simulation of machine dynamics, rotating unbalance and analysis and synthesis of cams and geared systems.
Prerequisite(s): ENGR 241 , ENGR 315 , ENGR 317 , and MATH 320 .
|
| |
-
ENGR 472L - Engineering Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 3
|
| |
-
ENGR 473 - Machine Design
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring
Fundamental principles, including stress analysis and design considerations for static and fatigue strength. Design and selection criteria for mechanical components including fasteners, bearings, gears, and miscellaneous elements used in mechanical systems.
Prerequisite(s): ENGR 371 and ENGR 472 .
|
| |
-
ENGR 473L - Engineering Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 3
|
| |
-
ENGR 474L - Engineering Lab
|
| |
-
ENGR 475L - Engineering Lab
|
| |
-
ENGR 476 - Applied Finite Element Analysis Lab
Credit(s): 1
Lecture Hours: 0
Lab Hours: 3
When Offered: Spring
Introduction to the application of the finite element method to the solution of stress, vibration, heat transfer, and fluid dynamics problems using commercial finite element software.
Prerequisite(s): ENGR 371 and ENGR 472 .
Corequisite(s): ENGR 473 .
|
| |
-
ENGR 477 - Gas Dynamics
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring
An examination of topics in one-dimensional compressible flows. Topics include sonic velocity, Mach numbers, isentropic flow, nozzles, diffusers, normal and oblique shocks, flow with friction and heating.
Prerequisite(s): ENGR 341 .
Corequisite(s): ENGR 317 .
|
| |
-
ENGR 481 - Machine Vision and Robotics
Credit(s): 3
Lecture Hours: 2
Lab Hours: 0
When Offered: Fall
Introduction to the design, programming and integration of robotic systems in industrial applications. Includes the hardware, software and methods used in high speed image processing; methods for interfacing vision systems with robots and other automated systems.
Prerequisite(s): ENGR 317 .
Corequisite(s): ENGR 483 .
|
| |
-
ENGR 481L - Machine Vison & Robotics Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 3
|
| |
-
ENGR 483 - Industrial Controls I
Credit(s): 3
Lecture Hours: 2
Lab Hours: 0
When Offered: Fall
Programmable logic controllers and associated hardware. Electrical hardware including digital I/O, switches, and relays. Mechanical hardware including pneumatic and hydraulic system fundamentals. Emphasis on information at the device and machine levels.
Prerequisite(s): ENGR 231 .
Corequisite(s): ENGR 232 and ENGR 233 .
|
| |
-
ENGR 483L - Industrial Controls I Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 3
|
| |
-
ENGR 484 - Industrial Controls II
Credit(s): 3
Lecture Hours: 2
Lab Hours: 0
When Offered: Spring
A continuation of ENGR 483 . Analog I/O, PID control loop setup and tuning, and PLC networking. Emphasis on information at the device, machine, and system levels.
Prerequisite(s): ENGR 232 , ENGR 233 and ENGR 483 .
|
| |
-
ENGR 484L - Industrial Controls II Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 3
|
| |
-
ENGR 485 - Polymer Manufacturing Processes
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall
Analysis of polymer and elastomeric material behavior in processing, mechanics of processing, identification of appropriate processes, diagnosis of process related problems and mathematical modeling of process designs.
Prerequisite(s): ENGR 301 (Mechanical Concentration) and ENGR 310 .
|
| |
-
ENGR 486 - Quality Engineering
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall, Spring
Practical and statistical engineering methods to improve product quality and process design in a manufacturing environment. Topics covered will include manufacturing metrology, geometric dimensioning and tolerancing (GD&T), statistical process control and methods (SPC), quality standards, and the use and performance of measuring devices in the manufacturing environment.
Prerequisite(s): ENGR 311 .
|
| |
-
ENGR 487 - Hydraulic and Pneumatic Systems Design
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall, Spring
A study of fluid power components and their application in engineered systems including design criteria, system performance, and standardized symbols and schematics. Performance characteristics and differences are discussed.
Prerequisite(s): ENGR 241 and ENGR 341 .
|
| |
-
ENGR 490 - Special Topics (Title of Topic)
Credit(s): 1-3
Lecture Hours: 1-3
Lab Hours: 0
When Offered: As Needed
Selected topics relating the state-of-the-art in engineering science and engineering design. Engineering subjects which are of current interest and importance but are not covered in depth in any other course. May be repeated for credit.
Prerequisite(s): Approval of advisory committee and dean.
|
Engineering, Civil |
| |
-
CIEG 354 - Advanced Land Surveying and Geomatics
Credit(s): 3
Lecture Hours: 2
Lab Hours: 0
When Offered: As Needed
Principles of the Global Positioning Systems (GPS), mapping surveys, mapping, astronomical observations, control surveys and geodetic reductions, state plane coordinates, boundary surveys, surveys of public lands, construction surveys, horizontal curves, vertical curves, volumes, photogrammetry and an overview of geographic information systems.
Prerequisite(s): ENGR 350 .
Crosslisted With: AGET 354
|
| |
-
CIEG 354L - Civil Engineering Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 3
|
| |
-
CIEG 454 - Land Surveying with GPS
Credit(s): 3
Lecture Hours: 2
Lab Hours: 0
When Offered: As Needed
Land surveying techniques and methodologies using survey-grade Global Positioning Systems (GPS). Topics include: the GPS signal, biases and solutions, GPS receivers and GPS surveying methods (static, differential GPS [DGPS], kinematic, pseudokinematic, rapid static, on-the-fly and real-time kinematic [RTK]), coordinates, planning a GPS-based survey, observing (equipment, reconnaissance, monumentation, logistics) and postprocessing. Techniques for proper utilization of RTK and DGPS.
Prerequisite(s): ENGR 454 .
Crosslisted With: AGET 454
|
| |
-
CIEG 454L - Civil Engineering Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 2
|
| |
-
CIEG 456 - Boundary Control and Legal Principles
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: As Needed
Role of the surveyor in boundary establishment, creating GLO boundaries, creating nonsectionalized boundaries, locating easements and reversions, resurveying and retracing sectionalized lands, locating sequential conveyances, locating simultaneously created boundaries and locating combination descriptions and conveyances. Fundamentals associated with the ownership, transfer and description of real property; federal and state nonsectionalized land surveys; and riparian and littoral boundaries. Surveyor ethics, liability and professionalism.
Prerequisite(s): ENGR 350 .
Crosslisted With: AGET 456
|
| |
-
CIEG 456L - Civil Engineering Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 2
|
| |
-
CIEG 458 - Subdivision Site Planning and Development
Credit(s): 3
Lecture Hours: 2
Lab Hours: 0
When Offered: As Needed
Physical elements of designing land subdivision including: sustainability and site design, site analysis, site grading (soil properties, slope stability, erosion and sediment control), designing for people, street and parking lot design, infrastructure (cul-de-sac design, parking lot design, streets, etc. ), landscape restoration (wetlands, streams, vegetative cover, erosion damage, brownfield redevelopment, etc. ), site layout, vegetation in the site plan, project management issues, historic landscapes and preserving the land and landscape and culture.
Prerequisite(s): ENGR 350 .
Crosslisted With: AGET 458
|
| |
-
CIEG 458L - Civil Engineering Lab
Credit(s): 0
Lecture Hours: 0
Lab Hours: 2
|
Engineering, Industrial |
| |
-
INEG 310 - Operations Management
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall, Spring, Summer
Management of business transformation processes. A survey of the basic concepts, principles and practices involved in the design, implementation, operation and control of business processes (operations) in contemporary business organizations. Emphasis is placed on the integration of the operation function with other disciplines to foster achievement of strategic and tactical goals in both manufacturing and service organizations. Topical coverage includes operations strategy, product/service design, process design, contemporary quality management, forecasting, capacity planning, facility location and layout, work design and scheduling, production planning and control with a broad emphasis on goal-driven process and productivity management and quality management.
Prerequisite(s): MATH 210 and either MGT 300 or MGT 301 , or ENGR 311 and Instructor Approval.
Crosslisted With: MGT 310
|
| |
-
INEG 312 - Introduction to Management Science
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall
Introduction to quantitative methods used in business decision making. Topical coverage includes mathematical programming, dynamic and network programming, multi-objective decision modeling, decision theory, simulation, inventory models and waiting lines. Computer software will be used to analyze application problems in business and economics.
Prerequisite(s): CSCI 201 and MGT 310 , or INEG 310 .
Crosslisted With: MGT 312
|
| |
-
INEG 330 - Process Control and Improvement
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring
A methodology for selecting, defining, measuring, stabilizing, evaluating and improving both production and service processes is presented. A variety of analytical methods are utilized in the sequence of instruction including the seven simple tools of quality, metrology, SPC, process capability analysis and experimental design.
Prerequisite(s): Junior standing.
Crosslisted With: MGT 330
|
| |
-
INEG 332 - Quality Management Systems
Credit(s): 3
When Offered: As needed
Covers the American Society of Quality (ASQ) Body of Knowledge Sections I, II & IV. Addresses the evolution of quality from the beginning of the 20th Century to the present day. Includes topics from elements of current Quality Management Systems and Auditing to important elements of every Quality Management System essential to the success of active management systems.
|
| |
-
INEG 334 - Process and Service Design and Control
Credit(s): 3
When Offered: As needed
Covers the American Society of Quality (ASQ) Body of Knowledge Sections III & IV. Explores management and control of processes, products, and services. Within this class, the student will learn about the importance of monitoring and measurement systems in quality. Included within this class is a workshop that provides hands on experience with measurement tools (Gage Reliability & Reproducibility, Bias, Accuracy, Linearity, Stability, Discrimination and Measurement Uncertainty).
Prerequisite(s): MATH 210 or ENGR 311
|
| |
-
INEG 336 - Quantitative Methods and Improvement
Credit(s): 3
When Offered: As needed
Covers the American Society of Quality (SAQ) Body of Knowledge Sections V & VI. Addresses the mathematical tools needed in the monitoring and measurement activities used in a quality management system environment. Includes methods for Continual Improvement of processes, systems, products and personnel.
Prerequisite(s): MATH 210 or ENGR 311
|
| |
-
INEG 402 - Industrial Safety
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: As Needed
Accident prevention, control and record keeping, safety standards, codes and laws. Fundamentals of industrial hygiene, occupational safety and health. Organization and development of safety programs.
Prerequisite(s): Junior standing or instructor’s approval.
|
| |
-
INEG 412 - Service Operations Management
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring
A study of operations management specific to the service sector. Emphasis is on formulating service strategy, designing and improving the service delivery system, and matching supply and demand in service operations. Topics include strategic positioning and service strategy, internet strategy, environmental strategy, new service development, managing service experiences, front- and back- office interface, offshoring and outsourcing, analyzing processes, service quality, yield management, inventory management, and waiting time management.
Prerequisite(s): MGT 310 or INEG 310 .
Crosslisted With: MGT 412
|
English |
| |
-
ENGL 105 - English Composition
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall, Spring, Summer
Introduction to the fundamentals of written discourse. Study of rhetoric, grammar, and style as means to effective prose, with an emphasis on the writing process. Writing Center visits embedded in assignments. Readings and concomitant writing assignments. Predominantly a skills course. Mandatory placement. Students may also elect to take ENGL 105 in place of ENGL 111 to receive extra support during the writing process. Students must complete ENGL 105 and ENGL 112 or ENGL 113 in sequence. In order to proceed to ENGL 112 , students must complete ENGL 105 with a grade of C or higher.
|
| |
-
ENGL 111 - English Composition
(TBR: ENGL 1010)
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall, Spring, Summer
Introduction to the fundamentals of written discourse. Study of rhetoric, grammar and style as means to effective prose. Readings and concomitant writing assignments. Predominantly a skills course. Students must complete ENGL 111 and ENGL 112 in sequence. In order to proceed to ENGL 112 , students must complete ENGL 111 with a grade of C or higher.
|
| |
-
ENGL 111H - Honors English Composition
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall, Spring
An introduction to written discourse for students with Enhanced ACT scores in English of 28 or above.
|
| |
-
ENGL 112 - English Composition
(TBR: ENGL 1020)
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall, Spring, Summer
Further study of written English and practice in composition. Readings and research writing with documentation. Predominantly a skills course. Students must complete ENGL 111 and 112 in sequence. For successful completion of ENGL 112, students must earn a grade of C or higher.
|
| |
-
ENGL 112H - Honors English Composition
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Fall, Spring
An introduction to written discourse for students with Enhanced ACT scores in English of 28 or above.
|
| |
-
ENGL 113 - English for Technical Writers
Credit(s): 3
Lecture Hours: 3
Lab Hours: 0
When Offered: Spring, As Needed
Technical writing is the art and science of translating complex information into the language used by the intended audience. Technical writing is widely used in career paths, including computer science, robotics, bioengineering, and agriculture. The intent of this class is to prepare students majoring in one of the applied sciences for the type of technical writing that they will be exposed to within their specific career. Students engage in conveying technical information in a clear, concise, and coherent manner to a variety of audiences. Exercises are taught through a variety of genres such as risk analysis reports; instructional memos; design/use/analysis reports; and technical reports. Key competencies include collecting, analyzing, and organizing information. In order to proceed to ENGL 113, students must complete ENGL 105 or ENGL 111 with a grade of C or higher.
|
| |
Page: 1 <- 2
| 3
| 4
| 5
| 6
| 7
| 8
| 9
| 10
| 11
| 12
… Forward 10 -> 23 |
Print this Page